I was a little bit bored one evening so I decided my large Yankee candle needed a sweater! It’s a really quick pattern so it shouldn’t take too long.
- 7mm crochet hook
- DK wool in any colour you like.
***I use American crochet terms in my patterns!***
- Make a foundation chain 38 sts long.
- DC into 3rd st from end of chain. Continue to end. (35)
- Ch 1. SC to end.
- Repeat 2 and 3 twice more.
- I added shell pattern stitching for the next few rows. I recommend this link for thorough instructions on how to crochet in this stitch.
- Repeat 5 twice more.
- Repeat 2 and 3 three more times.
- Fasten off and use the loose end to sew the sides together.
You can now pull the candle cosy over the top of the candle!
This fits on all large Yankee candles, but will also fit any glass jar or candle of a similar size.
It’d be a great personalised addition to any gift (birthdays, housewarming, Christmas, etc)
(Pattern can also be edited to exclude the shell stitching. Another 3 repeats of steps 2 and 3 would do instead).
I have to confess, I don’t know this pattern off-by-heart because I made it up as I went along, but I’ll give you a rough idea!
Note: I use US notation for my patterns.
I used a 4.5 mm crochet hook and double knit yarn. You’ll also need a button and a darning needle for weaving and sewing the button on.
- Measure the width of your camera and make the foundation chain that long plus two sts. (I think mine was around 20).
- 2 hdcs in first st (placing your hook through the third st on the chain) and 1 hdc to the second last st, 2 hdcs in the last, then start crocheting in the “bottom” or underside of your foundation chain. Start with 2 hdcs and then 1 hdc to second last st and 2 hdcs in last st. Sl st to join.
- Ch 2 and hdc into each st around. Sl st to join. Repeat this until you get to roughly the right size of your camera. (It would look like a bowl or basket-type thing at this stage.
- When you’ve gotten to this stage, begin rows of hdcs on one half of you bag only to make the flap. (So if you’ve got a bag 44 sts in the round, maybe make the flap 20 sts.) Repeat rows until you reach your desired length.
- To the end of the flap on my camera bag, I added triangle edging. Firstly, because it looked nice and secondly, because it saves on having to make a button hole and you can pop your button through the central triangle. The pattern for that can be found here.
- Weave in your ends once you fasten off.
- Sew button on. I used a contrasting yarn for this, but it’s not essential.
I was bored one evening and was in the mood to try something Halloween-themed, so I fashioned my own crochet ghost, which you can put a light into to add to the eerie effect! 😀
- 4.5 mm crochet hook
- double knit yarn of any kind in white (I used acrylic)
- double knit yarn in black (embroidering eyes and mouth)
- tapestry needle
- a small light or flameless tea light
I use American notation for my crochet pattern.
- Make a magic circle with 6 sc.
- 2 sc in each sc around (12)
- Sc in next sc, 2 sc in next sc around (18)
- Sc in next 2 sc, 2 sc in next sc around (24)
- Sc 24 sc rounds until you reach your desired length (about 3-4 inches). Then FO and weave in your ends.
- Embroider the face in whatever scary way you like.
- To make a “ledge” inside your ghost, make a foundation chain 7 ch long.
- Turn, sc to end (6)
- Turn, sc to end (5)
- Turn, sc to end (4)
- Sc in each st all around, FO and sew to the inside of your ghost, so that it makes a roughly oval-shaped “ledge” inside for you to rest your light on.
- Put your light in, and enjoy!
I also used sewing thread to hang the ghost off the bottom of my mantelpiece in my living room. Any coloured thread is fine, the thinner it is, the more difficult it is to see, so it will look like it is floating around 🙂
I wanted kittens but I wasn’t allowed get them…. they were perfect!! A tubby fluffy white one with a black tail and a lanky black one. I wanted to call them Manny and Bernard, respectively. (It’s an homage to Manny Bianco and Bernard Black who run Black books, i.e. the book shop in Dylan Moran’s short comedy series…. it’s hilarious, watch it.)
So I made my own kitty. Manny now sits on or couch, cuddled into the fur blanket. He watches your tea for you and keeps your hubby away from your snacks!
I found this cute pattern. It has a slight typo in the row number for the head. You’ll have to knit 14 rows, decrease 4 rows, increase 4 rows, knit 14 rows.
Also the tail is slightly confusing. What she means is: cast 16 st. knit a full row, knit 10, turn, knit back along those 10, knit a full row… repeat that 3 times in total.
She doesn’t say to turn your work inside out after sewing up the edges. I did, I always find it gives a nicer edge and makes it rounder…. I guess it depends on how you sew along the edges.
Its a cute idea and you can make many colours. You could make a striped one or a really fluffy one using furry wool.
I apologise in advance for this pattern, I didn’t keep a good count of the pattern as I was going, so it might not be exactly the same, but it’ll be close enough to resemble this pesky little coloniser!
You will need:
- 4-4.5 mm crochet hook (US size 6-7 or G will do nicely).
- Aran or worsted weight yarn in the colour of your choice.
- Tapestry needle.
- sc = single crochet
- st(s)= stitch(es)
- Inc= increase
- hdc= half double crochet
- Dec= decrease
- FO= fasten off
- ch= chain
- Make a magic circle with three sts on it (3)
- Inc to 6 (make 2 scs in each sc)
- 1 sc in 1st st, 2sc in 2nd and 3rd sts, continue to end. (10)
- 1 sc in 1st st, 2 sc in 2nd st, continue to end. (15)
- 1 sc in 1st and 2nd sts, 2 sc in 3rd st, continue to end. (20)
- Use hdc around. (20)
- Repeat hdc rows until you have a tube-like structure measuring about 7.5 cm (3 inches) in length.
- Dec to 15 (1 sc in 1st and 2nd sts, dec with next st, continue to end)
- Dec to 10 (1 sc in 1st st, dec with next st, continue to end)
- If you haven’t been stuffing by now, stuff as much as you can now before the opening gets too narrow to fit anything in.
- Dec to 6 (1 sc in 1st st, dec winext 2 sts, continue to end)
- Dec to 3 (dec in every st around)
- Sew closed and FO.
- To make the flagellae, I just picked out stitches randomly from the tube of hdc stitches and ch 10 right there. I did about 3 a row, every second row until the end of the hdc tube. FO and weave in your ends.
If any of the instructions aren’t making sense, feel free to ask me any questions. As I said, I’m working off memory. I hope you enjoy making these 😀
I don’t know about you, but I am constantly paranoid that I’m going to scratch the touchscreen on my phone. Because of this, I came up with this quick and easy pattern for a phone cover!
- 3.75mm needles
- 25g of Bergere de France yarn in Angélite
- Yarn needle
- Cast on 19 stitches.
- For your rib, K1, P1 and repeat to the end of the row. Start next row P1, K1 and repeat to end. Repeat this once more.
- K to end.
- P to end.
- Repeat 3 and 4 until you reach the desired length.
- Once desired length is reached, do a second set of ribbing, as in 2.
- Cast off.
- Turn your length of knitting “inside out” and use the whip stitch to sew your work together. I overlapped the ribbing on the opening of the phone cover to make sure the phone would stay secure inside it. It also looks a bit like a mouth. See?
I think, in future designs, I’ll make a colour change at the ribs and attach eyes, knitted arms and legs to it, so it can look like a real phone-gobbling monster!!
If you make your own version of this, please show me. I love seeing a fresh take on things! 🙂
I got this pattern from Ravelry and it’s so easy you can bang one out in about 2-3 hours, depending on your own speed.
You will need Aran (worsted) weight yarn and a 6.5mm (Size K) crochet hook. Darning needle is also required.
I chained 81 for my own cowl, but you can make it longer or shorter by using any multiple of 4 plus an extra 1. By row 4 of the pattern, you should end up with this.
Once completed, I used the whip stitch to make mine into a moebius, so it turned out like this. The full width of my cowl was made with 2 repeats of the pattern.